Table des Matières

Publicité

Menu Settings

VIDEO SETTINGS

Item
WB AREA
COLOUR
LEVEL
BLACK
LEVEL
AUTO
BLACK
ENHANCE
LEVEL
E-44
For setting the white balance target area.
Select "ON" and press the [SET] button to display the
[WB AREA EDIT] screen. Move the displayed frame
up/down/left/right using the cross key to set the area
for white balance adjustment. The size of the frame
cannot be altered.
[Setting values: OFF (full screen), ON (set area)]
(Default value: OFF)
Memo When [D.ZOOM MAX] is set to "x8", "---" is
displayed, and the camera operates in the
"OFF" setting.
Adjusts video signal colour level.
[Setting values: -5 (lighter colour) to NORMAL to 5
(darker colour)] (Default value: NORMAL)
Memo When [DAY/NIGHT] is set to "B&W", [COLOUR
LEVEL] is not valid even when it is set.
Adjusts the black level of the video signal.
[Setting values: -5 (low level) to NORMAL to 5 (high level)]
(Default value: NORMAL)
Memo When [MONITOR TYPE] is set to "LCD1" or
"LCD2", "---" is displayed and [BLACK LEVEL]
cannot be set.
Increases the black level of the image automatically
under low illumination to enhance the visibility of dark
subjects.
[Setting values: OFF, ON] (Default value: ON)
Adjusts contour correction to enhance sharpness on
the monitor screen.
[Setting values: -5 (soft) to NORMAL to 8 (sharp)]
(Default value: NORMAL)
Memo When [ANTI FOG] is set to "AUTO", it is
recommended to set [ENHANCE LEVEL] to a
value above "6".
Function and Setting

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tk-c9511eg

Table des Matières