Motion Detect Area Setting - JVC TK-C9510E Manuel D'instructions

Detailed Settings

Motion Detect Area Setting

For setting the area in which Motion Detect functions, which outputs
alarm signals when there is movement in the video image. When [AUX
FUNCTION] is set to "OUT:ALARM", alarm signals are output from the
rear AUX terminal.
Memo Perform Motion Detect setting for each scene file as
necessary.
1 On the [MENU] screen, select a scene file for which its Motion
Detect area is to be set.
2 On the [MENU] screen, select [MOTION DETECT], and move the
cross key to the left/right to set to "ON".
The [MOTION DETECT] screen appears.
3 Select the [AREA EDIT] item on the [MOTION DETECT] screen,
and press the [SET] button.
The [AREA EDIT] screen appears.
4 Move the cross key up/down or to the left/right to select the area
you do not want to detect.
The area that appears blinking in black-and-white moves.
5 Press the [SET] button.
The area not to be detected is set, and is illuminated in gray.
To cancel the preset area, press the [SET] button again.
6 Repeat steps 4 and 5.
7 After setting is complete, press the [MENU] button.
Returns to the [MOTION DETECT] screen.
MOTION DETECT (A:GENERAL)
DETECT LEVEL
AREA EDIT
E
TITLE SIZE DOUBLE
TITLE COLOUR WHITE
ALARM TIME 5s
DEMONSTRATION..
<MENU>RETURN <SET>SUB MENU
[MOTION DETECT] Screen
E-56
NOMAL
.
Blinking
[AREA EDTI] Screen
Illuminated in gray Blinking