Output Of Black-And-White/Colour Switch Signal - JVC TK-C9510E Manuel D'instructions

Output of Black-and-white/Colour Switch Signal

The state of rear AUX terminal can be changed at colour/black-and-
white switch. This is enabled when [AUX FUNCTION] is set to
"OUT:B&W".
(A page 52)
Setting [AUX FUNCTION] to "OUT:B&W"
1 Select the [AUX FUNCTION] item on the [MENU] screen, and
press the [SET] button.
The [AUX FUNCTION] screen appears.
2 Move the cross key up/down to select [AUX FUNCTION].
3 Move the cross key to the left/right to set to "OUT:B&W".
4 Press the [MENU] button to exit.
Returns to the [MENU] screen.
MENU
SCENE FILE..
BASIC SETTINGS
VIDEO SETTINGS..
VIDEO EFECT..
MOTION DETECT
MAINTENANCE..
PRIVACY MASK
AUX FUNCTION..
E
<MENU>RETURN <SET>SUB MENU
Screen
[MENU]
.
A:GENERAL
OFF
AUX FUNCTION
AUX FUNCTION
E
INPUT POLARITY
OUT POLARITY
<MENU>RETURN
[AUX FUNCTION]
Detailed Settings
OUT:B&W
MAKE
MAKE
Screen
E-61