Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING
!
•
While the appliance is operating do not remove the glass panel. This will cause the remote control and touch
panel to disfunction.
Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
note:
Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, the
appliance will lose its memory function and will reset to factory mode when the power returns.
5.1
main power button
The main power button is located on the front bottom right side of the appliance.
5.2
operating touch display panel and remote control
Power
Orange Flame
Blue Flame
When appliance is Off:
1 push - Puts appliance into Standby Mode.
2 pushes - Turns appliance on.
When appliance is On:
1 push - Turns appliance off.
Controls flame brightness.
Settings:
remote
control
control
F-0 - Flame off
panel
F-1 - Brightest flame flame
F-2 - Bright flame flame
F-3 - Medium flame
remote
F-4 - Small flame flame
control
control
panel
F-5 - Smallest flame
operating instructions
5.0 operating instructions
EN
19
W415-1767 / C / 01.29.18
Publicité
Chapitres
Table des Matières
