38
6.1
SAFETY SCREEN INSTALLATION / REMOVAL
EN EN
THE DOOR LATCHES ARE PART OF A SAFETY RELIEF SYSTEM AND MUST BE PROPERLY
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance
and must be installed.
Install the safety screen, spline up.
A.
Secure the safety screen with the side brackets, use the 6 screws provided.
B.
Place the safety screen onto the appliance by lifting it up and hooking onto the side shoulder screws.
C.
Adjust to fi t snug against the fi nish material. Ensure safety barrier is installed correctly.
B
W415-1439 / A / 07.10.15
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
ENGAGED. DO NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
A
WARNING
!
X2
C
S A F
X6
S A F
E T Y
75.1
E T Y
S C R
E E N
S C R
E E N
X4