All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1
Operating Elements
and Connections
1 Mains jack POWER IN for connection to a
socket (230 V~ / 50 Hz) via the mains cable pro-
vided
2 Support for the mains fuse
Always replace a blown fuse by one of the same
type.
3 Mounting brackets
4 DMX signal input (3 poles, XLR) to connect a
light controller;
pin 1 = ground, 2 = DMX−, 3 = DMX+
5 Setscrews for the mounting brackets
6 Microphone for music control
7 Control buttons
Button MENU to exit a submenu
Buttons UP and DOWN to select a menu item
and to change a setting
Button ENTER to call up a menu item and to go
to the next parameter
8 Display
9 Mains output jack POWER OUT for connection
of another light effect unit
10 DMX signal output (3 poles, XLR) for connec-
tion to the DMX input of another DMX light effect
unit;
pin 1 = ground, 2 = DMX−, 3 = DMX+
1.1 Infrared remote control (fig. 2)
Button
switch all LEDs off
DMX
switch DMX mode on
SLAVE
switch slave mode on
AUTO 1/ 2
automatic programs 1 and 2
speed of the programs 1/ 2,
SPEED
press button repeatedly to change the speed
SOUND 1/ 2 music control 1 and 2
switch stroboscope on, press button repeatedly
STROBE
to change the flash frequency
switch primary colours red, green and blue as
R, G, B, W
well as white for colour spotlight on and off
10
Function
2
Safety Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The power supply unit uses danger-
ous mains voltage. Leave servicing
to skilled personnel and do not insert
anything into the air vents! Inexpert
handling or modification may result
in electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range: 0 – 40 °C).
G
Do not place any vessel with liquid on the unit,
e. g. a drinking glass.
G
The heat generated inside the unit must be dissi-
pated by air circulation; never cover the air vents
of the housing.
G
Do not operate the unit and immediately discon-
nect the mains plug unit from the socket
1. if the unit or the mains cable is visibly dam-
aged,
2. if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled
personnel.
G
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
safely installed, if it is not correctly connected or
operated, or if it is not repaired in an expert way.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
.