Jennair W10918236C Guide D'utilisation Et D'entretien page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

As long as the two conditions above are met,
further transmitter testing will not be required.
However, the OEM integrator is still responsible for
testing their end- for any additional compliance
requirements required with this module installed
(for example, digital device emissions, PC peripheral
requirements, etc.).
IMPORTANT NOTE: In the event that these
conditions cannot be met (for certain configurations
or co-location with another transmitter), then the
FCC and Industry Canada authorizations are no
longer considered valid and the FCC ID and IC
Certification Number cannot be used on the final .
In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate
FCC and Industry Canada authorization.
END PRODUCT LABELING
The XPWG3 Module is labeled with its own FCC
ID and IC Certification Number. If the FCC ID and
IC Certification Number are not visible when the
module is installed inside another device, then
the outside of the device into which the module is
installed must also display a label referring to the
enclosed module. In that case, the final end product
must be labeled in a visible area with the following:
"Contains Transmitter Module FCC ID: A5UXPWG3"
"Contains Transmitter Module IC: 10248A-XPWG3"
or
"Contains FCC ID: A5UXPWG3"
"Contains IC: 10248A-XPWG3"
The OEM of the XPWG3 Module must only use the
approved antenna(s), which have been certified with
this module. The OEM integrator has to be aware
not to provide information to the end user regarding
how to install or remove this RF module or change
RF related parameters in the user manual of the
end.
The user manual for the end product must include
the following information in a prominent location:
"To comply with FCC and Industry Canada RF
radiation exposure limits for general population,
the antenna(s) used for this transmitter must be
installed such that a minimum separation distance
of 20 cm is maintained between the radiator
(antenna) and all persons at all times and must not
be co-located or operating in conjunction with any
other antenna or transmitter."
Open Source License Usage
The following statements refer to the portions of
this software based in part on FreeRTOS v7.0.2,
http://www.freertos.org. The use of this software
is governed by the terms of GNU General Public
License v. 2, which is available at:
http://www.gnu.org/licenses/gpl-2.0.html. A copy of
the source code may be obtained by written request
for the software by name to opensource@whirlpool.
com, along with the address for delivery.
The following statements refer to those portions
of the software copyrighted by Eclipse Foundation,
Inc. Copyright (c) 2007, Eclipse Foundation, Inc. and
its licensors. All rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are permitted
provided that the following conditions are met:
Redistributions of source code must retain the
Q
above copyright notice, this list of conditions, and
the following disclaimer.
Redistributions in binary form must reproduce
Q
the above copyright notice, this list of
conditions, and the following disclaimer in the
documentation and/or other materials provided
with the distribution.
Neither the name of the Eclipse Foundation, Inc.
Q
nor the names of its contributors may be used to
endorse or promote s derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions of this software are copyright (c) Sawtooth
Consulting Ltd. 2006-2015 All rights reserved.
Portions of this software are copyright (c) Arrayent,
Inc. 2015 All rights reserved.
The following statements refer to those portions of
the software copyrighted by Swedish Institute of
Computer Science.
Copyright (c) 2001-2004 Swedish Institute of
Computer Science. All rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions, and
the following disclaimer.
2. Redistributions in binary form must reproduce
the above copyright notice, this list of
conditions, and the following disclaimer in the
documentation and/or other materials provided
with the distribution.
3. The name of the author may not be used to
endorse or promote s derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS
IS"' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The following statements refer to those portions
of the software copyrighted by Marvell International
Ltd. Copyright (c) Marvell International Ltd.
All rights reserved.
DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
ASSISTANCE | 27

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

P9wb2lP9rfwb2lEdr2rxd1

Table des Matières