Jennair W10918236C Guide D'utilisation Et D'entretien page 21

CARE AND CLEANING
5.
Install the water filter cap onto the new
filter. Be sure to align the arrows so the
grooves in the filter align with ribs in the
filter cap.
6.
Insert the filter into the housing.
7.
Turn the water filter 90° clockwise until it
locks into place and the arrows are aligned.
8.
Push the water filter door closed.
9.
The filter light does not automatically reset
when the new filter is installed. To reset
the filter, press and hold FILTER RESET for
3 seconds. After 3 second countdown, the
Filter Reset button light will flash 3 times
and replace Filter indicator will turn off.
CARE AND CLEANING | 21