Unit Assembly - Omron MICRO Air NE-U22V Manuel D'instructions

You must clean and disinfect all removable parts before using the device.
For directions on cleaning and disinfecting go to page 14 and 15 under
Care and Maintenance.
The device must be assembled before it is used.
General Information
• Components may fit tightly since they are made to prevent the
medication from leaking.
• Hold the device securely with both hands.
• Install the parts securely. You may hear a click sound as you
install some of the parts.
1. Attach the Mesh Cap to the Medication Bottle.
Insert the
Mesh Cap
vertically.
Do not open the
Bottle Cap.
2. Attach the Medication Bottle to the Main Unit.
Align both
electrodes with
each other .

UNIT ASSEMBLY

Close it
securely.
7
You have finished
installation .
You have finished
installation.