Filling The Medication Bottle - Omron MICRO Air NE-U22V Manuel D'instructions

FILLING THE MEDICATION BOTTLE

Remove the Mouthpiece or Mask and the Mask Adapter
from the Main Unit.
1. Open the Mesh Cap.
Hold the device securely
in your hand.
2. Fill the Medication Bottle.
Be careful to prevent the Mesh Cap from closing as shown
in the illustration.
The maximum capacity of the Medication Bottle is 7mL.
Caution
To prevent damage to the device, add the medication slowly.
Do not allow the medication to overflow the medication port.
3. Close the Mesh Cap.
Caution
To prevent damage to the
device, engage the Mesh
Cap correctly in place. If the
Mesh Cap is not properly
closed medication will leak.
4. Attach the Mask Adapter to the Main Unit.
Attach the Mouthpiece or the Child's Inhalation Mask
to the Mask Adapter.
NOTE: For instructions on attaching the Mask Adapter and
Mouthpiece return to Unit Assembly on Page 8.
Do not open the
Bottle Cap.
Lift up the mesh
cap while pressing
your thumb upward
on the brim.
Check that the
Mesh Cap is closed.
11