Fitting Instructions - gdw 1081 Mode D'emploi

Hyundai / Mitsubishi Galloper 4x4
1998- ....
Ref. 1081

Fitting instructions

1. Place mounting piece (1) against the underside of the left side of the chassis with points (A') on the
provided drillings were the tubes (2) where inserted first. Insert the bolts and place the washers on top of
the chassis but do not tighten yet.
2. Place the towbar with points (A) on the right side of the chassis and also on the provided drillings where
the tubes were inserted first, points (B) and (B') match points (B) and (B') of the already assembled piece
(1). Insert all bolts and tighten firmly.
3. Assemble (*) and tighten firmly.
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.