Bushnell IMAGEVIEW 11-1210 Mode D'emploi page 12

Follow the on screen instructions. After drivers are successfully installed first, return to the CD install
screen, and click on "Roxio PhotoSuite 5" to install the photo imaging software. If you have questions
about using your ImageView, including the downloading process, help is available at www.bushnell.
com or call Bushnell customer service at (800) 423-3537. For the quickest response, contact customer
service via email at: imageview@bushnell.com. Please include the following information:
• Your ImageView model #
• Your Windows operating system (98/98SE, 2000, ME. XP)
• The specific error message, if any, that you encounter.
For PhotoSuite software technical support, go to the Roxio website at: www.roxio.com and click
"Support", then select your PhotoSuite version and search the online knowledge base. Note that
PhotoSuite has an extensive Help menu, so be sure to reference that first.
DOWNLOADING PHOTOS TO YOUR COMPUTER:
1. Connect the USB cable from the computer to the camera.
2. You may have a brief wait for the process as Windows "builds a driver information database" and
confirms that the PC matches the correct software to the attached hardware device.
3. Open the program PhotoSuite 5
4. Click "Transfer" in the left frame area under "Home Page"
5. Select "Transfer from new device"
6. Under (#1) "Select a device from the list", click "DigiCam", then click "Next" at the bottom of the
left frame area.
8