Before Use; Safety Instructions - JB Systems TMC 200 Mode D'emploi

ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these
operating instructions very carefully.
FEATURES
 Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)
MPEG1 layer3 (32 + 44,1 + 48kHz)
o
o MPEG2 layer3 (16 + 22,05 + 24kHz)
o MPEG2.5 layer3 (8 + 11,025 + 12kHz)
Supports both CBR and VBR bitrate modes.
o

Digital scratch effect via touch sensitive jog wheel

Electronic brake effect + 3 digital effects:
o Echo, flanger, filter
o Manual control of parameters
Beat synchronized mode
o

Alphanumeric LCD display (CD-TEXT and ID3v2 tags: shows title, artist, bitrate, ...)

Hot Cue buttons can hold up to 4 cue points or seamless loops per track!
 Permanent memory for up to 2000 hot cue points and loops

Seamless real-time loop edit function!

Full automatic BPM counter

Real-time cue ("Cue on the fly")

Anti-shock Memory 10seconds

1/75sec Frame search, also on MP3

Pitch Lock (Master Tempo)

Pitch ranges: +/-4% +/-8% +/-16% +/-100% (up to +/-16% on MP3)

Pitch bend on jog wheel and buttons for perfect mixes

Ultra fast memory start within 10msec

Auto cue function(-48dB)

Fader start, fader stop (back cue),

S/PDIF digital audio RCA coaxial

Reads CD-DA, CD-R, CD-RW

Selectable elapsed, remain and total remain time display

Single/continuous play

Relay play allows consecutive playback on two decks

60 seconds Transport Protection

Sleep mode (saves the life span of the laser)

BEFORE USE

Check the contents:
Check that the carton contains the following items:
 TMC200 unit
 User manual
 1 Mains cable
 1 cinch/cinch cable
 1 mono mini-jack cable for fader start and relay play
JB SYSTEMS®
USER MANUAL
1/78
ENGLISH

SAFETY INSTRUCTIONS:

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be
placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition: switch the unit immediately off when the power cord
is squashed or damaged.
 Never let the power-cord come into contact with other cables!
 When the power switch is in OFF position, this unit is not completely disconnected from the mains!
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
INSTALLATION GUIDELINES:
 Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.
 Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.
will affect its performance and may even damage the unit.
 Take care to minimize shocks and vibrations during transport.
 When installed in a booth or flight case, please make sure to have good ventilation to improve heat
evacuation of the unit.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance.
TMC200 JB SYSTEMS®
CAUTION: To reduce the risk of electric shock, do not
CAUTION
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol means: Safety Class II appliance
2/78
USER MANUAL
TMC200