WAGNER SuperFinish SF 27 Mode D'emploi page 4

GB
Translation of the original operating instructions
General notes
Before using this accessory for the first time read through
these Operating Instructions and also familiarise yourself
with the Operating Instructions for the paint spraying
unit. The safety instructions for the paint spraying unit
apply to this accessory.
Area of application
The large volume container makes the job of processing larg-
er volumes of coating material a convenient one without the
need to permanently change container.
The large volume container is suited to the following Wagner
models (as per March 2017):
Model designation
SF 27, SF 31
HeavyCoat, PS 3.39
Only materials which can be processed
according to the relevant unit's operating
instructions may be used.
Description (Fig. 1)
1. Container
3. Grab handle
5. Ball cock
Coupler (accessory)
7.

2
1
5
4
7
6
4
2. Lid
4. B coupling
6. Container Connector
(accessory)
3
Large volume container
Technical Data
Maximum container volume:
Max. tyre pressure:
Dimensions (L x W x H):
Weight (empty):
Installation
Only install container on level ground.
Block the wheels to prevent the container from slipping away.
Transportation
Only transport empty containers up and
down stairs. If containers are filled, there
is a risk of tipping and falling due to their
weight.
Attention
Tilt empty containers backwards using the handle and move
by sliding or pulling.
The container must not be transported
with a crane.
Attention
Start-up
Do not exert any force on the ball valve
when coupling and uncoupling the con-
tainer connector. Only use the Wagner cou-
pling wrench included as a tool.
Hold in place with a spanner on the con-
nector.
Connect the coupler (Fig. 3.1) to the container connector.
Couple the container connector (Fig. 3.2) using the coupling
wrench to the large container.

1
2
100 l
2.0 bar
1100 x 640 x 1065 mm
26.8 kg