Fein WSG10-115 Mode D'emploi page 13

3 41 01 117 21 0.book Seite 13 Dienstag, 13. September 2011 8:13 08
Symbol Explanation
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false reac-
DANGER
tion can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Worn out power tools and other electrotechnical and electrical products
should be sorted separately for environment-friendly recycling.
Product with double or reinforced insulation
~ or a. c. Alternating current
1 ~ Alternating current single-phase
Ø Diameter of a round part
Character Unit of measure,
national
n rpm; /min
P W
°
U V
f Hz
I A
m kg, lbs
l ft, in
Ø ft, in
m, s, kg, A, mm,
V, W, Hz, N, °C,
dB, min, m/s
Explanation
Rated speed
Unit of measure for electrical power
Unit of measure for the angle width
Unit of measure for the electric voltage
Unit of measure for the frequency
Unit of measure for the electric current intensity
Unit of measure for the mass
Unit of measure for length, width, height or depth
Diameter of a round part
Basic and derived units of measure from the international sys-
tem of units SI.
2
en
13