Oscillation Function / Swing Function; Cleaning And Vare; Overheating Protection Circuit - Unold 86440 Notice D'utilisation

then the appliance switches off.
The appliance will switch on again
as soon as the room temperature
drops below the set temperature.
6. To switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.

OSCILLATION FUNCTION / SWING FUNCTION

1. With this function it
is possible to distribute
the air flow over a lar-
ger area, because the
appliance swings back
and forth in a specific
radius.
2. The oscillation function can be
switched on in every mode. To do
CLEANING AND CARE
Switch off the appliance. To
switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.
Allow the appliance to cool
completely.
1. Never use any abrasive scouring
agents, steel wool, metal objects,

OVERHEATING PROTECTION CIRCUIT

1. The appliance is equipped with
an overheating protection circuit
that switches the appliance off
when it is heated over 70° C.
2. If the overheating protection cir-
cuit has been tripped, switch the
appliance off, unplug the plug
from the electrical outlet and let
the appliance cool for at least
10 minutes.
3. Eliminate the cause of the over-
heating, (e.g. excessive dust in
Be aware that the appliance
can become very hot - fire ha-
zard! Particularly ensure that
children are kept away from
the appliance.
this, press the "I/O" button on the
top of the appliance.
3. If you want to stop the appliance
in a specific position, press the
"I/O" button again.
4. Switch off the oscillation function
before you switch off the appli-
ance.
hot cleaning agents or disinfec-
tants.
2. You can remove dust in the
appliance if you carefully hold a
vacuum cleaner against the air
inlet and outlet grille.
3. Store the fan heater in a dry, safe
place so that it is protected from
dust, shocks, heat and moisture.
the appliance, air outlet grille is
covered) and start up the appli-
ance again.
4. If after eliminating the cause, you
still cannot switch the appliance
back on, or if the overheating pro-
tection circuit switches on wit-
hout an apparent reason, contact
our customer service organisation.
19