While Operating Machine - Tornado 2500B Glazer Manuel D'utilisation Et De Maintenance

2500B SAFETY FEATURES
1. When the brush deck is raised the pad will not spin.
2. When battery cover / hood is off a safety button serves as a kill switch, preventing the
pad from spinning.
3. A dead man lever must be squeezed to start machine operation.
NOTE: If any of the safety features are not operating properly, discontinue use of the
machine until the unit is serviced by an authorized service technician.

WHILE OPERATING MACHINE

1. Always operate with caution when burnishing around walls and obstacles.
2. Always reduce speed to maintain control when turning.
3. Stay clear of floor obstacles, such as electrical plates or grates, they will destroy pad.
Raise pad to avoid floor obstructions.
4. Change or turn pads over when soiled.
5. Check battery meter's discharge level periodically.
ATTENTION: Do not operate machine in the red zone, floor damage and brush motor
overload may result.
6. If pad motor circuit breaker trips, reduce pad pressure and /or replace soiled pad.
FOR SAFETY: Before leaving or servicing machine stop on level service and turn off
machine.
FOR SAFETY: When transporting machine, do not lift machine if batteries are installed.
WARNING: Fire or Explosion Hazard. Never Use Flammable Liquids or Operate
machine in or Near Flammable Liquids, Vapours or Combustible Dust
1.800.VACUUMS a new spin on cleaning
a Tacony Company
12