Cleaning and care
7.5
Defrosting
Humidity can form frost in the interior of the cooling device. This reduces the cooling
capacity. Defrost the device in good time to avoid this.
A
NOTICE!
Do not remove the layer of ice with hard or sharp tools. These can
damage the plastic of the vaporiser.
➤ Take the food or other objects out of the device and place it in another cooling
device to keep it cool, if necessary.
➤ Switch the cooling device off (see chapter "Switching off the coolbox" on
page 13) and leave the drawer open.
➤ Wipe off the water resulting from defrosting or – if present – empty the collecting
tray.
8
Cleaning and care
!
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Risk of damage
•
Never clean the cooler under running water or in dish water.
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
14
CD20, CD30
EN