Cleaning And Maintenance - Dometic MiniBar RH430STE Instructions De Montage Et De Service

Cleaning and maintenance

I
NOTE
If you are not going to use the cooling device for a long time, leave
the door slightly ajar to prevent unpleasant odours building up
➤ Place the cooling device on a firm base.
➤ Connect the connection cable to the AC mains supply.
✓ The cooling device starts cooling the interior.
➤ Set the temperature controller (fig. 1 1, page 3) to the desired tempera-
ture (3 – 12 °C).
➤ If you wish to switch the cooling device off, pull out the connection cable
or ...
➤ Rotate the temperature controller (fig. 1 1, page 3) anti-clockwise to the
OFF position.
8 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the power supply before you
clean and service it.
A
NOTICE! Risk of damage
 Never clean the cooling device under running water or in dish
water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooling device.
➤ Use a soft cloth, lukewarm water and a mild detergent to clean the inside
of the cooling device.
➤ Wash out the cooling device using clean water and dry thoroughly.
➤ At annual intervals, remove dust from the cooling aggregate at the back
of the cooling device using a brush or a soft cloth.
10
All manuals and user guides at all-guides.com
RH430, RH440
EN