Using The Appliance - ARIETE X Force Mode D'emploi

EN
Parquet brush (G)
This can be used to clean delicate surfaces.
Narrow suction nozzle with brush (H)
This suction device is ideal for cleaning between the folds on fabrics, joints, corners or niches that
are impossible to reach using the floor cleaning device. This attachment can also be fitted directly
to the handle (I).
VACUMM CLEANER ASSEMBLY
WARNING: Before fitting or removing the attachments, always make sure that the vacuum clean-
er has been unplugged from the power mains.
- Fit the suction device (I) into the air inlet opening (C) and press it in until it clicks into place. To
remove it, it is necessary to press the two release buttons (L) at the same time and to pull it out
(Fig. 2).
- Insert the telescopic tube (Q) into the handle (Fig. 3).
- Push the slider device (P) forwards and pull the bottom section of the tube out to the required
length (Fig. 4). Then simply release the slider and the device will return to its original position.
- Fit the required attachment to the telescopic tube.

USING THE APPLIANCE

Caution: Before using the vacuum cleaner, remove all large or sharp objects from the floor to
avoid any possible damage to the cleaner itself.
First of all, before using this appliance, unwind the power cord completely and plug the appliance into
the mains socket.
To switch on the appliance, press the foot switch (A) on the vacuum cleaner. While using the appli-
ance, pull it along behind you as if it were a trolley.
Important: In some cases, the appliance may "whistle" when switched on. This is not a fault and
the noise will go away with time.
Suction power adjustment
It is possible to regulate the suction power as required, using the relevant dial (F). We recommend
using a minimum power for delicate materials. Select medium suction power for mattresses, uphol-
stered furniture and carpets. Select maximum suction power for tiled, wood or other resistant floors.
Secondary air valve (M)
The secondary air valve (M) is on the hand grip (N) and it is used to regulate suction power. The wider
the valve is opened, the less the suction power and vice versa.
- To open the valve, push it upwards and to close it, push downwards.
Open the valve to prevent curtains and the like from being sucked into the cleaner.
- Minimum suction power for curtains and delicate materials.
- Medium suction power for cushions, mattresses and carpets.
- Maximum suction power for tiled, wood or other resistant floor surfaces that are heavily soiled.
- 8 -