CAME RODEO 1 Mode D'emploi page 45

BELT SUPPORT
The belt support is used to control belt vibration. It is installed at the centre of automation
systems powering two door wings whose support profile exceeds 3020 mm in length. If
necessary, the support may be bent into the required shape.
N.B. Make sure that the belt support does not come into contact with moving parts during
operation.
Mouting screw
CHECKING FOR PROPER ASSEMBLY
After the beam has been installed and all mechanical
adjustments have been made, made sure that:
_ no scraps of materials left by manufacturing processes
remain on the guide track, which would damage the track
and/or the trolley wheels;
_ no foreign objects and/or tools have been left on the inside
of the beam;
_ the door wings are properly aligned and the mechanical
stops have been correctly positioned as described above.
Before applying power to the automation system, check for
proper operation by opening and closing the system manually
(push directly on the door wings to perform this check).
MECHANICAL ADJUSTMENTS
Belt support
RODEO
SERIE
13