INSTALLATION OF ACCESSORIES (available upon request)
MA7012 - Electric lock
Electro-mechanical system for locking the door wings, with gravity-powered mechanical locking action and
electric unlocking system. This device locks the door wing(s) in the closed position (and/or in the open position)
by engaging a bracket installed on one of the trolleys.
By using dip switches 7 and 8 (10-way module), the electric lock can be programmed to operate as follows:
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
MI1010 - Spring-loaded Anti-panic device
Mechanical device to open the doors, made up of a spring-loaded system which operates without electric
power supply. With this device, use the dip-switches as indicated.
DIP SWITCH
10-WAY
1
2
3
4
5
6
7
7 ON
8 ON
9
10
7 OFF
8 ON
9
10
7 ON
8 OFF
9
10
7 OFF
8 OFF
9
10
DIP SWITCH
4-WAY
8
9
10
1
2
3
Deactivated. Use this setting when the electric lock is
not installed.
Locking with doors closed. This is normal operation:
the unit locks on closure and is released electrically when
the open command is given. This is the default setting.
Locking with doors closed and open. The unit locks
both when open and closed (when positioned correctly
(1)
), and is released electrically by each open and close
command.
Delayed locking. The electric lock is unlocked when
the first "open" command is given at initial start-up or
after a power failure, or when "door open" is selected
on MA7041. The lock is locked when "door closed" or
"output only" is selected on MA7041.
4 ON
Activation of constant push while closing.
(10-way dip switch)
4
1 ON
Activation of spring-loaded anti-panic device.
(4-way dip switch)
RODEO
SERIE
19