Important Messages And Frequently Asked Questions - Seecode Vision HF920 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 96

Important Messages and Frequently Asked Questions

7.
Q1: Message "Battery Low" displayed on the screen
When this message is displayed on the screen, please charge your battery as soon as possible.
Q2: Cannot power on the Seecode Vision after charging more than 20 minutes
For the first-time usage, the Seecode Vision should be charged for at least 40 minute before tuning it on. It is
recommended that the battery should be fully charged before using Seecode Vision.
Q3: Cannot hear anything on the Seecode Vision
You should check the followings:
Seecode Vision power is on
Seecode Vision has paired with a Bluetooth device
Seecode Vision has connected with a Bluetooth device. The handset that supports Handsfree Profile is an
exception.
Seecode Vision and handset are within 10m working distance
Does location and environment where you are trying to use the Seecode Vision have good signal strength.
Q4: Seecode Vision cannot be found when a handset tries to pair with it
Seecode Vision may not be in pairing mode.
Q5: Does the paired Seecode Vision or the paired handset need to be re-paired after powering off?
No. Please note that for the handset that supports handsfree profile, the Seecode Vision and the handset must
be connected before making any call. For details, refer to "2.7.4".
Q6: Why does the voice dialing not work?
Check whether your handset supports voice dialing or not and then make sure you have recorded voice tags.
Please note that noisy environment will also affect voice dialing.
Q7: How can I upgrade my Seecode Vision to the latest software version?
For software upgrade, please refer to Chapter 5 " Upgrade Software ".
If you cannot upgrade the software by yourself, you can send your Seecode Vision to your appointed local
service center and ask the service personnel to do it.
If an error happens in your upgrade and causes a function failure, please send your Seecode Vision to your
local service center for help.
.
Seecode Vision HF920
32

Publicité

Table des Matières
loading

Table des Matières