Phonebook Operations (Optional); Download/Synchronize Phonebook; Initiate Phonebook Downloading On Seecode Vision; Initiate Phonebook Synchronization On Handset - Seecode Vision HF920 Manuel D'utilisation

Seecode Vision HF920

3. Phonebook Operations (Optional)

3.1 Download/Synchronize Phonebook

3.1.1 Initiate Phonebook Downloading on Seecode Vision

Connect the Seecode Vision with the handset before commencing download. Press button to enter the main
menu. Select and then select the sub-menu Download. If no problem exists with handset compatibility, the
downloading starts. You will hear the voice prompt "Start downloading. Please wait". Icon indicator will be
displayed on the screen until the downloading is complete. The downloaded phonebook will replace the existing
phonebook stored in the Seecode Vision. When the downloading is completed, you will hear the voice prompt
"Download completed" and the icon indicator will disappear.
If Seecode Vision does not have enough space to save all the phonebook records, the downloading will be
terminated when the phonebook memory is full and the message "Full Record!" will be displayed on the screen.
The phonebook records downloaded before the downloading stops will be saved in Seecode Vision. The Seecode
Vision can store up to 400 phonebook records.
If there is a handset compatibility problem, the downloading will be terminated immediately. You will hear the
voice prompt "Automatic transfer not supported by phone" and see the message "Sync Failed!" displayed on the
screen. The original phonebook records will remain in Seecode Vision.
Note that, you can try to send phonebook records one by one to Seecode Vision from the handset if you fail to
initiate phonebook downloading from Seecode Vision side.

3.1.2 Initiate Phonebook Synchronization on Handset

For detailed operation procedure, refer to your handset's user manual. Ensure that before the synchronization starts,
Seecode Vision is in standby mode with no Bluetooth connection established with the handset. Icon
indicator will be displayed on the screen until the synchronization is completed or the memory space of Seecode
Vision is run out. If there is compatibility problem, your handset will display error messages (check your handset
for details).
Note:
Phonebook synchronization from the handset may be different for each handset manufacturer and model.

3.2 Use Phonebook

Display phonebook
When the Seecode Vision is in standby or connected mode, press and hold button for 3 seconds to display the
phonebook or use the menu to display the phonebook (for details, refer to section "2.4.1"). If there is no record in
the phonebook, the message "No Record!" will be displayed on the screen. Otherwise an alphabetical index of the
phonebook will be displayed. The alphabetical index is listed A-Z. Records that do not belong to this index are
categorised into "...". You can press button or to scroll up or down the index, and press button to select
the highlighted character and display all the records under this character. If no record is found with this character as
the initial, records with the following character as the initial are displayed.
. 20