Two-Link Operation; Connecting Two Handsets - Seecode Vision HF920 Manuel D'utilisation

Pause: Press button
Stop: Press button
Backward: Press button
Forward: Press button
Fast backward: Press and hold button
Fast forward: Press and hold button
In addition, you can press button
Note:
The music will be paused if a call comes in. You can answer or reject the call in the usual way. When the call is
ended, the music will be resumed automatically.

2.8 Two-Link Operation

The Seecode Vision can be connected with two handsets simultaneously. This brings great convenience to the users
who own two handsets, for example those with a business/work phone and a personal phone.

2.8.1 Connecting Two Handsets

Different methods can be used to connect two handsets which are already paired with Seecode Vision. For the
procedure of pairing, refer to section "2.5.1".
1. When the Seecode Vision is turned on, it automatically starts or tries to connect the last two handsets
which were connected with the Seecode Vision previously.
2. Initiate the connection on Seecode Vision.
When the Seecode Vision is in standby mode (no Bluetooth connection exists), press button
Seecode Vision starts to connect the last handset connected with it. After the connection is established,
the Seecode Vision automatically starts to connect the second last handset connected to it.
Note: If the handset which you want to connect to Seecode Vision is not the last or second last handset
connected with Seecode Vision, you need to initiate the connection on the handset.
3. Initiate the connection on the handset.
Start the Bluetooth connection on the handset following the user manual of the handset.
Note: The second connection can be started only after the first one is successfully established.
When both of the two handsets are successfully connected, the first one will be the active handset and the second
one will be the standby handset. The active/standby order can only be changed only once the first handset is
disconnected. Only the name of the active handset can be displayed on the screen of Seecode Vision.
Any call operation initiated by the Seecode Vision is performed only on the active handset, for example, redialing
and voice dialing.
Any operation initiated by either the active or the standby handset can be performed on the Seecode Vision in the
same way as it would with a single pairing.
.
.
.
.
.
for at least 3 seconds.
for at least 3 seconds.
to increase sound volume and button
Seecode Vision HF920
to decrease sound volume.
. The
17