Call Functions; Basic Call Operations; Adjust Volume; Mute An Active Call - Seecode Vision HF920 Manuel D'utilisation

If A2DP connection also exists, you need to press button
button to drop the HF connection. After the A2DP connection is removed, the icon indicator
the screen of the Seecode Vision.
Note:
For some handsets, the HF connection is removed at the same time when the A2DP connection is removed.
Reconnection
The Seecode Vision provides an auto reconnection function when accidental disconnection occurs.
If Enable is selected in the menu of Reconnection, the reconnection is divided into three stages:
1. Within 10 seconds of disconnection: The Seecode Vision keeps trying to reconnect.
2. Between 10 seconds and 10 minutes since disconnection: The Seecode Vision tries to reconnect every 10
seconds.
3. Between 10 minutes and 30 minutes since disconnection: The Seecode Vision tries to reconnect every 30
seconds.
If connection fails to be established within 30 minutes, the Seecode Vision stops the auto reconnection.
If Disable is selected in the menu of Reconnection, the Seecode Vision will keep trying to reconnect within the 10
seconds after the disconnection happens. If no connection is established in the 10 seconds, you need to establish the
connection manually.
2.6

Call Functions

2.6.1 Basic Call Operations

Answer a call: Press
Reject a call: Press
End a call: Press .
Redial: When the Seecode Vision is in standby mode, press and hold button

2.6.2 Adjust Volume

When the Seecode Vision is connected and in talk/play mode, you can adjust sound volume up or down by pressing
button and respectively. After adjustment, the volume indication bar will be displayed on the screen for 2
more seconds before disappearing.

2.6.3 Mute an Active call

When a call is active, you can press button
the call is muted, the icon indicator
seconds.

2.6.4 Transfer Call between Seecode Vision and Handset

When a call is in progress on the Seecode Vision, you can press and hold button
from the Seecode Vision to the handset.
.
.
.
to mute the call and press button
will be displayed on the screen and the Seecode Vision beeps every 5
to drop the A2DP connection first, and then press
for three seconds.
again to unmute the call. When
for 3 seconds to transfer the call
Seecode Vision HF920
disappears from
15