Exit Phonebook; Delete Phonebook/Call History Records - Seecode Vision HF920 Manuel D'utilisation

Usually the caller's name and phone number will be displayed on the screen. However, some characters may be
illegible for some reason, for example, if the name is in another language different to which the Seecode Vision is
using. In this case, "?" will be displayed. If the phone number is not saved with the caller's name in your handset,
only the phone number will be displayed on the screen of the Seecode Vision. In addition, if multiple numbers,
such as home, work and mobile, are stored against a contact name, the characters /h, /w, and /m will be displayed
on the screen of the Seecode Vision after the caller or contacts name.
Note:
Phonebooks of more than one handset may be saved in the Seecode Vision. If the Seecode Vision is in standby
mode (disconnected), press and hold button
time. If Seecode Vision is connected, it displays the phonebook of the handset which is being connected with it.
Call history records
When the Seecode Vision is in standby or connected mode, press and hold button
incoming call records/outgoing call records. You can also use the menu to display the call records. For details, refer
to section "2.4.1". If no call record is found, the message "No Record!" will be displayed on the screen.
In either the phonebook records or the call history records, press button
When the Seecode Vision is connected, you can press button
a call history record, you can press button
number. When the number is dialed, you will hear the voice prompt "Calling <Number>".

3.3 Exit Phonebook

When you are browsing phonebook/call history records or the details of a record, you can press button
to standby mode. When you are browsing the details of a record, you can press button
of menu and press button

3.4 Delete Phonebook/Call History Records

To delete all the phonebook records, press
To delete all the call history records, press
.
for three seconds to display the phonebook downloaded just last
to see the details of the record and press button
again to return to the standby mode.
to enter the main menu, select
to enter the main menu, select
Seecode Vision HF920
/
or to scroll up or down the records.
to dial the number you select in the phonebook. For
to return to the last level
, and then select Erase.
and then select Erase.
for 3 seconds to display
again to dial the
to return
21