3)
Follow your phone user guide to activate Bluetooth device search on the phone. You will see a list of
Bluetooth equipment on your phone screen at the end of the searching process.
4)
Select Vision from the list and initiate pairing following handset's on-screen prompts. Enter passkey
"0000"and confirm to pair Seecode Vision with your handset. Once the pairing procedure is completed,
you will hear voice prompt "Pairing successful". It indicates that the Seecode Vision and the handset are
paired.
Note: The Seecode Vision will remain in the pairing mode for about 2 minutes. If paring cannot be finished within
2 minutes, Seecode Vision will enter into the standby mode and the icon indicator
repeat the above steps to restart the pairing process.
2.5.2 Delete Paired Records
The Seecode Vision can be paired with up to 8 Bluetooth devices. To delete all paring records stored in the Seecode
Vision, perform the following steps:
1)
Press button
Select
2)
.
3) Press
.
4) Select Erase.
5)
Press
.
2.5.3 Quit Pairing with Bluetooth Equipment
When the Seecode Vision is in pairing mode, press button
icon indicator
will disappear.
2.5.4 Connecting/Disconnecting Seecode Vision with Bluetooth Handset
The Seecode Vision can only communicate with other Bluetooth devices once the Bluetooth connection between
the two devices has been established.
Connecting Seecode Vision with Bluetooth handset
If the Seecode Vision has already been paired with the handset, you can press
connection after the Seecode Vision is found in the list on the handset. During the connection, the icon indicator
will be displayed on the screen. When the HF connection is established, you will hear voice prompt "Phone
connected" and see icon indicator
establish A2DP connection between the Seecode Vision and the handset. When the A2DP connection is established,
icon indicator
will be displayed on the screen of Seecode Vision.
Note:
Some handsets can establish A2DP connection together with HF connection.
Disconnecting Seecode Vision with Bluetooth handset
When HF connection is already established between the Seecode Vision and the handset, but no call is active, you
can press
to drop the connection, or follow the handset's manual to drop the connection from the handset side.
After the disconnection, you will hear voice prompt "Phone disconnected" and the icon indicator
.
to enter the menu.
displayed. If the handset supports Bluetooth A2DP, press button
Seecode Vision HF920
will disappear. You need to
to exit pairing mode and enter standby mode. The
for connection or initiate a
to
will disappear.
14