Table des Matières
Publicité
86
E
TURNING OFF THE POWER
When you are finished using the camera, turn off the power.
1
Close the lens barrier.
2
In the Display mode, turn off the LCD monitor.
• When the power is turned off, indications on the control panel
and the LCD monitor go off.
3
When an AC adaptor is used, unplug it from the camera,
then unplug it from the power outlet.
Note:
• The images will be stored in the card even after the power is
turned off or when the card or the batteries are replaced.
Publicité
Table des Matières
