Table des Matières
Publicité
238
E
The flash does not fire.
The flash mode was set to the Off mode.
- Check the flash mode before shooting. (p. 102)
The subject is lighted.
- Set the flash to Fill-In mode. (p. 108)
The pictures already taken do not appear
on the LCD monitor.
The camera is in the Record mode.
- Close the lens barrier and depress the LCD monitor ON/OFF
button to turn on the LCD monitor. (p. 76)
There is no picture in the card.
- NO PICTURE appears on the LCD monitor. (p. 76)
There is a problem with the card.
- See the Error code chart. (p. 250)
The LCD monitor is hard to read.
The brightness may be incorrectly set.
- Adjust the brightness. (p. 228)
Publicité
Table des Matières
