Loading The Batteries - Olympia CAMEDIA C-21 Mode D'emploi

2
3
4
40
E

LOADING THE BATTERIES

This camera uses one 3V lithium battery pack (CR-V3) or two R6
(AA) NiMH batteries. An Olympus brand 3V lithium battery is
recommended.
R6 (AA) alkaline, manganese or lithium batteries cannot be used.
• Read "PRECAUTIONS WHEN HANDLING THE BATTERIES"
on page 5.
1
Make sure that the camera power is off (the lens barrier is
closed and the control panel and the LCD monitor are
off).
2
Press the battery compartment cover in the direction
shown to open it.
3
Insert the battery (batteries) correctly as shown.
4
Close the cover tightly by pressing the battery
compartment cover in the direction shown.
Note:
• Do not touch the inside of the battery compartment.