Table des Matières
Publicité
Video cable
Câble vidéo
Videokabel
152
Video output connector
Prise de sortie vidéo
Video-Ausgangsbuchse
4
E
CONNECTING TO A TELEVISION
Recorded images can be viewed on a TV (PAL only).
1
Make sure that the power of the TV and the camera are
off before connecting.
2
Connect the cable by inserting it into the video output
connector of the camera and the input connector of the
TV.
3
Turn on the TV.
4
Press the LCD monitor ON/OFF button on the camera,
and select a picture using the Jog dial.
Note:
• This function cannot be used when the camera is connected
to the P-300E printer.
• The LCD monitor turns off automatically when connected to a
TV.
• Refer to your TV/VCR instruction manual for information
about displaying video images.
• The picture may appear to be off-center on the TV screen
because of the TV adjustment.
• Your TV may produce a black frame around the picture,
which may look peculiar when printed to a video printer.
• The use of the optional AC adaptor is recommended.
• Images shown on screen can be saved to a video tape.
Publicité
Table des Matières
