Description Of The Appliance; Putting Into Operation - Boneco W1355A Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

Description of the appliance

Upper part
Water tank
Humidifier gear wheel
1 disc assembly
with 21 humidifier discs
Water tank cap
Ionic Silver Stick
®
(ISS)
Water base

Putting into operation

The best location for your appliance is:
• On the floor, or on a level, dry surface in the room.
• Pay proper attention to easy accessibility and sufficient
space for servicing and cleaning the unit.
• For increased evaporation performance in large rooms,
place the appliance near a radiator (warning: a tem­
perature of 50 °C must not be exceeded).
• Read the section "Filling the tank" on how to fill the
water tank (12 ­ 15).
• Place the water tank on the lower part (16).
• Connect the power cable to the power supply and
switch the appliance on using the On/Off switch.
• The unit will reach full capacity about 10 – 15 minutes
after you switch it on.
• Ensure that the power cable is not trapped (20). Do not
switch on the unit if the power cable is defective (41).
en
19

Publicité

Table des Matières
loading

Table des Matières