Test
p H :
8 . 0 0
Cl
0-6 mg/l
Zero
Test
ON
OFF
2.3. Analysis
Press the TEST key to carry out the reading.
The display shows the result, e.g.:
Pressing a different method key, e.g., "Cl", changes
the choice of measurement mode.
Pressing the ZERO key begins the zeroing routine
again.
For further measurements, the same cuvette (cleaned)
may be reused or zeroing may be done with an un-
used, clean cuvette.
If the TEST key is pressed after measuring without
rezeroing first, the device carries out measurements
based on the zeroed value already saved.
If no further measurements are to be carried out, turn
the device off with the ON/OFF key.
25