Fastening The Car Cradle To The Air Vents; Connecting The Car Cradle - Tronic TKHQ 10 A1 Mode D'emploi

Fastening the car cradle to the air vents

Press and hold the spreader button z so that the air vent clamps u
♦
open.
Clamp the car cradle to an air vent and release the spreader button z.
♦
To remove the car cradle from the air vent, press the spreader button z
♦
and carefully pull the cradle out of the air vents.

Connecting the car cradle

Connect the car cradle to the car/USB adapter 0 via the charging
♦
cable q, see fig. 1.
│ GB │ IE
■ 12
Fig. 1 Fig. 1
TKHQ 10 A1