Troubleshooting - Tronic TKHQ 10 A1 Mode D'emploi

Troubleshooting

A connected device is not charging (the white operating LED 8
on the car/USB adapter 0 does not light up)
No connection to the cigarette lighter. Check the connection.
♦
Depending on the vehicle type, it is possible that the ignition has to be
♦
switched on first.
The white operating LED 8 goes out after a device has been
connected
The car/USB adapter 0 is overloaded and will no longer charge con-
♦
nected devices. The internal overcurrent protection has been triggered.
Disconnect all connected devices from the car/USB adapter 0.
The white operating LED 8 lights up immediately and the car/USB
adapter 0 is ready for use again.
The mobile phone is not charging (the white LED 3 does not
light up)
No connection to the cigarette lighter. Check the connection.
♦
Depending on the vehicle type, it is possible that the ignition has to
♦
be switched on first.
The white LED 3 flashes rapidly after a mobile phone has been
placed in the car cradle
The mobile phone is not compatible with Qi induction charging
♦
technology and cannot be charged. Use a suitable adapter to charge
your mobile phone by induction charging.
Some mobile phones need to be taken out of their case for charging.
♦
│ GB │ IE
■ 16 TKHQ 10 A1