Cleaning And Maintenance - BaByliss PRO BAB3031E Mode D'emploi

2. The firmness of the curl is
regulated by the heat-up time
and the length of time the roller
is left in your hair.
3. For tight, firmer curls the rollers
should be allowed to heat up
longer. The rollers should be
left in the hair for at least ten
minutes before removing. For
soft, curvy curls and waves,
rollers should be removed from
the hair after a shorter period of
time.
4. To remove roller, hold roller in
one hand while removing clip
with the other hand. Gently
drop roller (do not pull) and let
curl bounce back after roller is
completely removed. Let cool
for one minute for a good set
curl, and then style hair into a
style that lasts for hours.
Styling Tips:
For soft curls and waves, use one
or two rollers on the top front
layer of hair. Use the remaining
rollers on the sides and back of
the head. The hair should be
taken in equal sections and rolled
under, toward your neck. After
eight to ten minutes the rollers
can be removed. Let hair cool for
one minute and then style. With
short hair, use two rollers to roll
the top front layer of hair.Use the
remaining three rollers to roll the
sides and back of head.Important:
For best results with short hair,
use the Super Clips in place of the
metal clips.
Fig. 2

CLEANING AND MAINTENANCE

How to clean the unit:
• Make sure the unit is turned off,
unplugged and cooled.
• Wipe with a damp cloth to remove
hair and any other residue.
• Allow the unit to dry completely
for several hours before using it
again.
• IMPORTANT! Never immerse the
unit in water or any other liquid.
How to clean the curlers:
• Remove the curlers from the
unit.
• Soak the curlers in warm, soapy
water for a few moments.
• Rinse in clean water, shake briefly
and dry with a cloth.
• Wait one or two hours until the
curlers are completely dry before
using them.
5