BaByliss PRO BAB3031E Mode D'emploi page 4

ENGLISH
Please carefully read the
safety instructions before
using the appliance.
BAB3031E
Set of 30 Ceramic
Professional curlers
Features:
• 30 colour-coded curlers
• 4 sizes:
- 6 small
- 8 medium
- 8 large
- 8 giant
• Stay-cool ends
• Folding arm to put into a vertical
position
• 2 heat settings
• On/Off switch
• Indicator light when switched on
• 15 super clips and a storage case
How to Operate the Hairsetter:
1. Place the unit on a level,
heatresistant surface.
Make sure that there is a curler
on each of the heating rods.
Close the lid.
2. Plug the unit in and turn it on.
The indicator light will come on.
The rollers will heat up in about
10 minutes. Average maximum
temperature will be about 110°C
on the first setting and about
120°C on the second one. Do
not lift the lid while the unit is
heating.
• IMPORTANT! When the curlers
are ready, hold them by their
ends, do not touch the heated
centre section of the curler. Do
not touch the heated rods or the
metal pieces of the unit during
use.
• IMPORTANT! Make sure that
the hot surfaces of the curler do
not touch your skin, especially
your face, neck, eyes and ears.
3. Never leave
plugged in and unattended.
Turn off the unit after use. Allow
to cool before storing. Always
unplug the hairsetter when not
in use.
4. When using the hairsetter, hair
should be clean and dry (or
slightly damp), never wet.
How to Curl Hair:
1. Place ends of hair on roller and
wind toward the scalp (Fig 1).
Roll hair firmly and secure with
clip. You can use either the
metal clip or the Super Clip.
When using the metal clip,
secure the roller by placing the
clip crosswise over the roller.
When using the Super Clip,
open the clip and place it on the
roller so that when released the
clip wraps around the rolled hair
(Fig 2).
4
the hairsetter
Fig. 1