Turbobrush - UFESA AS5200 Mode D'emploi

Examples of problems you may
encounter when using the vacuum
cleaner
PROBLEM
A characteristic
fl uttering in the
vacuum cleaner is
heard.
The vacuum
cleaner works less
effi ciently.
The cut-out of the
wiring system has
been triggered.
The vacuum
cleaner does not
work; the body or
the power cord is
damaged.
SOLUTION
● Check the CYKLON
dust container and other
accessories. Remove the
reason for the clog-up or
empty and clean the CYKLON
dust container.
● Replace or clean the fi lters.
Empty and clean the CYKLON
dust container, replace or
clean the fi lters, check the
suction pipe, the hose, and the
nozzle – remove the reason
for the clog-up.
Check if there are any other
devices, besides the vacuum
cleaner, plugged into the same
electrical circuit. If the cut-out
is triggered again, have the
vacuum cleaner repaired in
a servicing center.
Have the vacuum cleaner
repaired in a servicing center.

TURBOBRUSH

H
1
2
I