Makita VC4210L Manuel D'utilisation page 7

place.
• For double-insulated appliances: To reduce the risk of electric
shock, this appliance has a polarized plug (one blade is wider than
the other) and will require the use of a polarized extension cord.
The appliance plug will fit into a polarized extension cord only one
way. If the plug does not fit fully into the extension cord, reverse the
plug. If the plug still does not fit, obtain a correct polarized exten-
sion cord. A polarized extension cord will require the use of a polar-
ized wall outlet. This plug will fit into the polarized wall outlet only
one way. If the plug does not fit fully into the wall outlet, reverse the
plug. If the plug still does not fit, contact a qualified electrician to in-
stall the proper wall outlet. Do not change the equipment plug, ex-
tension cord receptacle, or extension cord plug in any way.
• To reduce the risk of disconnection of the appliance cord from the
extension cord during operating: Make a knot as shown in Figure
• It is recommended that the machine should be connected via a re-
sidual current circuit breaker.
• Arrange the electrical parts (sockets, plugs and couplings) and lay
down the extension lead so that the protection class is maintained.
• Connectors and couplings of power supply cords and extension
leads must be watertight.
• Maintain Appliance With Care – Inspect extension cords periodical-
ly and replace if damaged.
• Do not unplug by pulling on cable. To unplug, grasp the plug, not
the cable. The plug must always be removed from the socket outlet
before starting any service or repair work of the machine or the ca-
ble.
• In no circumstances should the power supply cord be wrapped
around fingers or any part of the operators person.
OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model
1)
Original instruction
7