Valve Clearance; Specifications - Mi-T-M GEN-1100-0MS0 Guide D'utilisation

SPECIFICATIONS

ITEM
ALTERNATOR ............................................................... 2-pole, Revolving Field, Self Exciting, Single Phase,
Frequency ..................................................................... 60 Hz
Rated voltage ............................................................... AC 20V
Rated output ................................................................ 900 VA (0.9 kVA)
Rated Amperage .......................................................... 7.5 A
Rated power factor....................................................... .0
DC output ..................................................................... 2V @ 8.3A
Over current protector .................................................. Circuit Breaker
GROUND SYSTEM ....................................................... Neutral Ground
ENGINE ......................................................................... Forced air-cooled, 4-cycle, OHV Gasoline Engine
Displacement ............................................................... 5.24 cu. in. (85.8 mL)
Fuel .............................................................................. Automotive Unleaded Gasoline
Fuel tank capacity (gal./L) ............................................ 0.93 / 3.5
Rated continuous operation ......................................... 3.5 hours (approx.)
Starting system ............................................................ Recoil starter
DIMENSION ................................................................... Length: 9.3 in (490 mm)
DRY WEIGHT ................................................................ 56. lb. (25.5kg)

VALVE CLEARANCE

(Intake & Exhaust) (in / mm) ........................................ 0.0039 0.002 / 0. 0.03
EMISSIONS DURABILITY PERIOD .............................. 250 hours
(California Only)
RECORD SERIAL NUMBER
Write you model number, machine serial number (see
serial number tag in illustration) and date of purchase in the
spaces provided below. Your dealer needs this information
when ordering parts.
Model No. ______________________________________________
Machine Serial No. _______________________________________
Date of Purchase ________________________________________
(To be filled in by purchaser)
Operator's Manual
Specifications
SPECIFICATION
AVR Brush Type
Width: .6 in (295 mm)
Height: 7.5 in (445 mm)
+ -
Note: Adjust the valve clearance while the engine is cold.
+ -
37