Signature Kitchen Suite SKSCR3001P Manuel page 15

1
Pull out the drawer support until it stops. Angle
the drawer into the space and set it on the
support.
2
Slide the drawer back until it lowers into place on
the support. Close the drawer.
CAUTION
The drawers are heavy. Always use two hands
when removing or assembling the drawers to
avoid product damage or personal injury. Always
empty drawers before removing or assembling
them.
Always open the refrigerator door completely
before removing or assembling the drawers.
1
Press the levers on either side of the drawer
support.
2
Keeping both levers pressed, lift the drawer
support slightly and remove it from the rail
system.
1
Pull both drawer rails out until they stop.
2
Line up the bottom edges on the sides of the
drawer support with the groove in each rail and
then lower the support until it clicks into place.
OPERATION 15