Control Panel; Control Panel Features - Signature Kitchen Suite SKSCR3001P Manuel

Control Panel

Depending on the model, some of the following functions may not be available.

Control Panel Features

1
NOTE
When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a button is
pressed. Once on, the display remains on for 20 seconds.
1
* Water Filter Reset
Replace the water filter when the Replace Filter
icon turns on. After replacing the water filter,
press and hold the Water Filter button for three
seconds to turn the icon light off. Replace the
water filter approximately every six months.
2
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
The default refrigerator temperature is 37 °F
(3 °C). Press the
to select a new set temperature from 33 °F to
46 °F (1 °C to 8 °C)
3
Smart Grid
Press the Smart Grid button to turn the Smart
Grid function On/Off. When the function is on,
the icon illuminates. The Smart Grid function
automatically turns on when the refrigerator is
connected to the Wi-Fi network.
When the refrigerator is responding to a Demand
Response (DR) message from the electric
company, the Grid text illuminates.
2
4
button repeatedly
5
* Wi-Fi
The Wi-Fi button, when used with the
SIGNATURE KITCHEN SUITE smart phone
app, allows the refrigerator to connect to a home
Wi-Fi network. Refer to the Smart Functions
section for information on the initial setup of the
application.
The Wi-Fi icon shows the status of the
refrigerator's network connection. The icon
illuminates when the refrigerator is connected to
the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to
connect to the network. The icon blinks while the
connection is being made, then turns on once
the connection is successfully made.
* Power
The Power button turns off all electrical power to
the unit.
Press and hold the Power button for 3 seconds
to turn off the power. When the power is off, the
indicator light is off. There is no need to turn off
power at the circuit breaker or wall receptacle.
Use this function for service or extended
vacations.
OPERATION 11
3
4
5