Focal TRIO6 BE Manuel D'utilisation page 20

TRIO6 BE
U s e r m a n u a l
20
FOCUS MODE
6 - INPUT
This input is for connecting the footswitch controller or for receiving the signal from the OUTPUT of the
FOCUS mode of a TRIO6 Be monitor.
7 - OUTPUT
This output is for connecting a TRIO6 Be monitor to another TRIO6 Be monitor.
Make sure you use an instrument-type cable with 2x 6.35 mm mono jacks to connect the footswitch to a
TRIO6 Be, and to connect two TRIO6 Be monitors.