Filter Cleaning Indicator; Access To Aluminium Filter; Oil Evacuation; Grease Tray Cleaningp - Pando E-390 Manuel D'installation

• Change the time remaining before cleaning the hood filter
Action
Activate the hob
Select the hood
Change the counter time
Confirm the setting
Manual cleaning of grease filters
The grease filters must be cleaned with a brush, lukewarm water and a mild detergent, when
cleaning by hand. Avoid using concentrated detergent.
To avoid
• Lime cleaners, scouring powders, liquid scouring agents or harsh universal cleaners
and oven sprays
Cleaning the grease filters in the dishwasher
The grease filters are to be placed vertically in the lower basket and washed at 60 ° C maximum
with a mild detergent.
When cleaning the grease filters in the dishwasher, they may become discolored depending on the
detergent used. However, this does not affect the proper functioning of the filters.
After cleaning, replace the grease filters in the hood.
When the grease filters are removed, the other removable parts must also be cleaned. This avoids
the risk of fire.
Access to aluminium filter p.53
Oil evacuation p.54
Grease tray cleaning p.55
Access and cleaning FCLR-AE p.57
ACTIVATED CARBON FILTER, WASHABLE AND RETRIGGERABLE. (OPTIONAL)
Access and cleaning FCCR-AE p.60
HIGH-EFFICIENCY REACTIVABLE CERAMIC ACTIVE CARBON FILTER (OPTIONAL)
Control panel
press key [ ] for 2 sec
press on the hood selection key
press on the timer key for 3 secondes
adjust to press on the key [ + ] or [ - ]
press on the timer key again
44
EN
Display
[ 0 ] and a dot flashes on
the hood selection key
[remaining time] on the
timer display
[remaining time] on the
timer display
-