User Manual (To Be Consigned To The End User) - Nice SWN 70-24 Manuel D'installation Et D'utilisation

•
tant to be informed by the installer of any residual hazards
and to take a few minutes to read this instruction manual:
especially the general precautions (product instruction
manual).
• It is important to keep this instruction manual (provided by
the installer) for any future doubts and to pass it on to any
new owners of the automation.
•
mands imparted by the user; improper use may constitute
a hazard: never activate the automation if persons, ani-
mals or objects are present in the operating range.
• Children: automation systems are designed to guaran-
tee high levels of safety. They are equipped with detection
devices that prevent movement if people or objects are in
the way, guaranteeing safe and reliable activation. How-
ever, children should not be allowed to play in the vicin-
ity of the automation; keep all remote controls away from
children: they are not toys!
• System checks: Check for any imbalance, signs of wear
or damage
• On a monthly basis, check that the gear motor reverses
direction when the door touches an object situated at a
height of 50 mm from the ground.
• Do not use the automation if it requires repair or adjust-
ment.
• Faults: if the automation displays anomalous behaviour,
cut off the power to the system. Never attempt any re-
pairs; contact your local installer for assistance.
• Testing, periodical maintenance and any repairs must be
documented by the person who has performed them;
these documents must remain in the custody of the own-
er of the system.
• The only recommended maintenance operations that the
user can perform periodically are the removal of leaves or
debris that may impede the automation.
• Disposal: at the end of the automation system's lifetime,
that the materials are recycled or scrapped according to
current regulations in your area for this product category.
• Control with safety devices out of order:
safety devices are not working correctly, the automation
can still be controlled.
• Important: if the safety devices are out of order the auto-
mation must be repaired as soon as possible.
• Warning: transit is permitted only if the door is open and
still.
User manual
(to be consigned to the end user)
- • Maintenance: The automation must undergo mainte-
nance work on an annual basis in order to guarantee long
life.
formed in strict compliance with the safety precau-
tions provided in this manual and in accordance
with applicable legislation and standards.
- The mechanism requires no maintenance and is
equipped with permanent lubrication.
-
- Fastenings: Make sure that the fastening bolts are all
in the correct position and in perfect condition. Mainte-
nance operations on mechanically-operated doors and
with the necessary experience and skills..
- Brake (if present): The perfect operation of the brake
should be checked during the annual tests. In the event
of the excessive wear of the brake lining, the entire
brake should be replaced.. Disconnect the power sup-
ply to the system before carrying out the replacement.
-
English – 29 English – 29