How To Install The Batteries - InnoCigs ESPION INFINITE AI Manuel D'utilisation

INNOCIGS ESPION INFINITE AI – USING THE DEVICE
Operating Instructions
Fully charge the two necessary and replaceable 21700 / 18650 batteries before first use. Please take note of the positive and negative
poles in the battery compartment. Ensure that there is no visible damage to the surface of the battery cells. The device has a 510-pin
connection with a spring-loaded connector, making it suitable for a variety of sub-ohm-capable clearomizers.
Tips for Cleaning
Use a dry cloth or cotton swab to clean the device.

How to install the Batteries

Open the battery compartment. Then place the two charged 21700 / 18650 batteries in the
device according to the poles indicated. Close the battery compartment.
Note: If the display does not light up after switching the device on, make sure that you
have inserted the batteries correctly and that they have sufficient power. If the device
still cannot be switched on despite fulfilling all the aforementioned prerequisites, please
contact our customer service department.
60