InnoCigs ESPION INFINITE AI Manuel D'utilisation page 63

INNOCIGS ESPION INFINITE AI – USING THE DEVICE
Power On / Off
Press the fire button five times in rapid succession to turn the unit on and five times to turn it off again. We recommend that you switch
off your device during transport and during long periods of non-use.
Vaping
Please select the correct operating mode and set a suitable wattage for your atomizer head. While holding the fire button of your e-cigarette,
inhale the vapor slowly and continuously through the mouthpiece of your clearomizer. Release the fire button while exhaling the vapor.
Charging and Updating the Device
Please note that you are using high-current 21700 / 18650 cells with a constant discharge current ≥ 25 A. Please use two identical
batteries. The Micro USB port is located below the two adjustment buttons. Using a micro USB charging cable, you can connect the
device in order to charge it or to connect it to a PC in order to download a software update.
We recommend that you charge the 21700 / 18650 batteries with an external charger because the charging process is optimized and
much faster by doing so.
61