InnoCigs ESPION INFINITE AI Manuel D'utilisation page 70

INNOCIGS ESPION INFINITE AI – SELECTING & OPERATING THE MENUS
Lock / Unlock the Resistance in TC/TCR Mode
In order to lock or unlock the resistance value, select in the main menu SET the submenu COIL. By pressing the fire button lock (locked
padlock) or unlock (unlocked padlock) the resistance. To exit the menu, press and hold the fire button continuously for a few seconds.
Note:
1. This function should only be used at room temperature, to ensure that the correct "base resistance" is locked.
2. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in TC-Ni, TC-Ti, TC-SS or
TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode.
Display and Setting of the Clock
If you want the clock to be displayed, go to main menu and select the dialog box RTC (Real Time Clock) in the MODE submenu.
By pressing the "UP"/"DOWN" adjustment buttons you can switch between digital display ("DIGITAL") and analogue display ("POINT").
Your device will automatically operate in the POWER mode. Select the CLOCK dialog box in the SET submenu to set time and date.
Use the "UP"/"DOWN" adjustment buttons to make your settings. Press the fire button to confirm your settings.
68