InnoCigs ESPION INFINITE AI Manuel D'utilisation page 68

INNOCIGS ESPION INFINITE AI – SELECTING & OPERATING THE MENUS
Settings in TC/TEMP (Ni, Ti, SS) Mode
By pressing the "UP"/"DOWN" adjustment buttons you can adjust the temperature up to which the coil of the atomizer head will be
heated. To set the wattage in TC mode select SET in the main menu and go to the POWER interface. Via the "UP"/"DOWN" adjustment
buttons you can select the wattage you prefer. With this wattage the device will start to fire when you take a puff. Press the fire button
to confirm your settings. Press the fire button to leave the menu.
Settings in TCR (M1, M2, M3) Mode
To set the Temperature Coefficient of Resistance of the wire you use press three times the fire button to enter the main menu and select
the MODE submenu. Choose between TCR M1, M2, M3 and press the fire button. Via the "UP"/"DOWN" adjustment buttons you can set
the appropriate value. The settings for power and temperature are carried out analogously to the TC/TEMP mode.
66